13 days left and we are soooooo close!
almost 6 years ago
– Tue, May 08, 2018 at 09:04:29 AM
Hello Backers, 3Dprinters and Makers!
Once again thank you for backing FLEKS3D Build Plate. We can not make this possible without you.
We are so happy with the results of this campaign so far. We knew it would be a hard go on Crowdfunding another time, but we had so many requests for new plates that we decided it was the only way.
We want to thank you all and ask you to share with your friends, colleagues and anyone else you know that is a 3D printer user! Lets get this thing funded so we can commit to our supplier for this next production run to get started!
Also Fiona our head of Community and Customer Service who some of you have gotten to know; wrote a excellent article on FLEKS3D and what we have set to accomplish. It was picked up by two 3D printing new outlets and we wanted to share those with you.
https://3dprinting.com/news/flex3d-3dprinter-flexible-build-plate/
https://www.3printr.com/fleks3d-build-plate-back-on-kickstarter-3049733/
Thanks again for all the support and we cant wait to get you your new plates this summer.
Best
TEAM FLEKS3D
HALFWAY THERE!
about 6 years ago
– Wed, Apr 25, 2018 at 07:47:29 AM
First off, thank you backers, your support is awesome!
We are halfway there in funding and closer than ever to bringing you FLEKS3D!
Please continue to share and help us promote so we can make it all the way and get these Build Plates made.
Best
TEAM FLEKS3D
thank you!
about 6 years ago
– Fri, Apr 20, 2018 at 06:14:51 AM
Hello Backers,
We would like to thank you for your continuing support for FLEKS3D!
Over the past 3 years, we have dedicated ourselves to innovating better, more accessible Build-Plates for FDM printing. We have sold over 10k plates world-wide and are now in the process of restocking.
We need your help - Kickstarter is a All or Nothing platform, and if we do not reach our goal we will not be able to reorder the plates! We are asking for your help. Tell your friends, family, and any makers you know about our easy-to-use, affordable 3D Printer Build Plate! Please feel free to explore our website or kickstarter campaign to read more about our products and initiatives.
With your help, FLEKS3D will be available to purchase online by June-July 2018.
Thank you again, and don't hesitate to reach out with any questions.
Best,
TEAM FLEKS3D
frame thickness and 12x12 inch in Mm.
about 6 years ago
– Wed, Apr 18, 2018 at 01:18:32 AM
- Frames are .5 in wide. 1 in in total. This area is not printable and will subtract from the printing area.
- The 12 X 12 inches is 304.8x304.8mm. It is a typo in the rewards. We can't update it since rewards can't be updates after someone has pledged of it.
